Interesting that you've had no replies to this so far, and I'm guessing it's because you already have done all the basic diagnostic steps, including confirming the 3.1v battery output (more than enough), which would often be the most common cause of a fault.
Maybe if you disconnect the battery. When I picked mine up. With a full tank of fuel it said 515 miles to empty, the average read 8mpg! So I'm not sure how it calculates the average as im currently averaging 35 mpg and its says 360 miles to empty with a full tank. I've never ever seen that 500 miles to empty again lol.
Hi everyone 🙂. When I start my car, the temp gauge will read correct - under 60 degrees as the screen/OBD reader will say 16 degrees. After a minute or 2, the temp gauge will shoot up to the midpoint, while the screen/OBD reader will still say its cold at 49 degrees.
Posted September 6, 2017. On 9/6/2017 at 3:42 AM, mjt said: I just checked on our Mk2.5. The switch is integrated into the latch.You can test by opening the bonnet then turning on the ignition. The display should show "Bonnet Open". If it doesn't you can try pulling out the connector under the latch and then try again.
UK/Ireland Location: Sussex. Posted January 23, 2022. Hi all, I recently replaced the front wheel bearing on my MK2. I nearly gave up half way through, but it all worked out in the end. Took a few days, but not bad for first time. Here is a video of what I’ve done:
This is what he's looking to do. As far as the radio display goes you can upgrade to an 8" OEM display or you can go with an aftermarket display. In both instances you are changing out the bezel. There's lots of information within this forum if you search it out. 2012 Ford Focus SEL MT HB Platinum White.
ye1ylA. 8r9zgv9scd.pages.dev/1658r9zgv9scd.pages.dev/3708r9zgv9scd.pages.dev/5978r9zgv9scd.pages.dev/5928r9zgv9scd.pages.dev/1098r9zgv9scd.pages.dev/4918r9zgv9scd.pages.dev/5938r9zgv9scd.pages.dev/199
ford focus mk2 mileage display not working
